h3. Introduction

In this tutorial, we describe how to create a Java algorithm that takes advantage of the most common and useful CIShell algorithm development feature. This includes information on how to  handle data in our algorithm (input and output), as well as how to  handle user-input parameters. We will do this by creating an algorithm  to perform a simple transformation on a graph.

h3. Prerequisites:

It is recommended that you read [CIShell Basics|http://cishell.org/?n=DevGuide.CIShellBasics] and run through [Tutorial 1: Creating a Hello World Java Algorithm|http://cishell.org/?n=DevGuide.HelloWorldTutorial] if you are not already familiar with basic CIShell development. You will need to have installed Eclipse and the CIShell Java Algorithm Wizard, as described in [Tutorial 0: Setting Up the Development Environment|http://cishell.org/?n=DevGuide.EnvSetup].  The algorithm produced in this tutorial requires the Network Workbench  tool environment to run, so you will need to have downloaded the [Network Workbench tool|http://nwb.slis.indiana.edu/download.html] installed to complete this tutorial.

You may also want to consult [CIShell Specification|http://cishell.org/dev/docs/spec/cishell-spec-1.0.pdf] for reference purposes.

h3. Section Table of Contents


h3. Introduction

In this tutorial we will create an algorithm to test the "Attack  Tolerance" of a network (deleting high degree nodes), as an example of a  simple algorithm which has data input and output, and utilitizes  user-input parameters. Testing Attack Tolerance is done by removing a  certain number of the nodes with the highest degree (nodes with the most  edges). If the network is relatively unfractured after the application  of this algorithm, it can be said to have a high attack tolerance. This  algorithm already exists in Network Workbench under the name "Delete  High Degree Nodes". [Documentation for this algorithm is available on the Network Workbench Wiki|https://nwb.slis.indiana.edu/community/?n=AnalyzeData.HighDegreeNodeDeletionTo]. To help us in this analysis, we will be using the JUNG graph library.

h3. Downloading the Jung Library Plugin and other Dependencies

The Jung Library is a graph data library, which is used internally in CIShell as well as in certain CIShell tool algorithms. As part of developing our algorithm for this guide, we  will be downloading the Jung library plugin and the other plugins it  requires from the CIShell repository. Alternatively, you may generate these plugins on your own, using the technique described in [Integrating 3rd-party libraries|http://cishell.org/?n=DevGuide.ThirdPartyLibrariesTutorial].

Whether you are building a plugin for an existing CIShell tool, or creating a new tool, it will be useful to have read access to the CIShell repository. A guide to configuring Eclipse for CIShell repository access can be found [here|http://nwb.slis.indiana.edu/Docs/NWB_environment_setup_Jun15.doc].  (It shouldn't be too complicated. It only involves downloading a plugin  which allows Eclipse to access Subversion (SVN) repositories, and then  connecting to the CIShell sourceforge.net Subversion repository).

Once you have downloaded and configured the  "Subclipse" Subversion plugin as described in the document linked above,  do the following:

1) Switch to the "SVN Repository Exploring"  perspective in Eclipse by clicking "Window" \-> "Open Perspective"  \-> "Other..." \-> "SVN Repository Exploring".

2) Create a repository location in Eclipse by  right-clicking in the "SVN Repository" view \-> "New" \->  "Repository Location" and pasting in "[https://cishell.svn.sourceforge.net/svnroot/cishell|https://cishell.svn.sourceforge.net/svnroot/cishell]", then clicking "Finish".

3) Expand the repository location we just created, and navigate to "trunk/libs/edu.uci.ics.jung".

4) Right-click the "edu.uci.ics.jung" project, and select "Checkout", then click "Finish".

We have now checked out the Jung library plugin. If  you switch back to the Java perspective, you will notice that the plugin  is in your Eclipse workspace. If you open the "META-INF/MANIFEST.MF"  file of this plugin, you'll notice that it is exporting a variety of  packages from the Jung java library. The plugin we are about to create  will import some of these packages.

We are not done yet though, since the Jung plugin  requires two other plugins of its own: cern.colt, and  org.apache.commons.collections. Check these two plugins out from the  "libs/" directory of the CIShell repository just like we did with the Jung plugin. Fortunately for us,  these two plugins have no dependencies of their own, so we should now  have all the plugins we need to write our own (plugin projects will show  red X icons on their project folders if anything is wrong).

h3. Setting up using the Java Algorithm Wizard

For this tutorial we will be creating a new plugin using the CIShell Java Algorithm Wizard. The steps to produce the algorithm are much the  same as in the Hello World tutorial, except that for the in_data and  out_data page we will be specified real input and output instead of  using "null", and we will add a parameter to the algorithm's user-input  parameters GUI.

To start the _Java Algorithm Wizard_, go to *File->New->Project..* in Eclipse, and select Java Algorithm Wizard from the CIShell folder.

The first few pages are much the same as they were in [Tutorial 1: Creating a Hello World Java Algorithm|http://cishell.org/?n=DevGuide.HelloWorldTutorial].  For this tutorial, we'll presume that you're using the default values  for the first few pages (up until the second Algorithm Properties page),  with the following exceptions:

Project Properties Page: Name your project 'org.my.attacktolerance'.

Bundle Properties Page: Set your Bundle Name to "Attack Tolerance". Set your Bundle Symbolic Name to "org.my.attacktolerance".

Algorithm Properties Page 1: Set your Algorithm Name to "Attack Tolerance" Set your Algorithm Class name to "AttackToleranceAlgorithm" Set your Algorithm Package to 'org.my.attacktolerance'.

On the second Algorithm Properties page we'll be doing something new, which requires a bit of explanation. in_data for a CIShell algorithm can be either files or Java objects. in_data for files is in the form of a MIME type, like "file:text/nwb" for the [Network Workbench|http://cishell.org/nwb.slis.indiana.edu] [network format|https://nwb.slis.indiana.edu/community/?n=LoadData.NWB].  in_data for Java objects is the class name of the object, such as  prefuse.data.Graph for the prefuse Graph object. For this tutorial we  will be using the data type "edu.uci.ics.jung.graph.Graph", which is the  full class name for the Graph object in the Jung graph library. You  should also check the checkbox for "On the menu", and set the menu path  to be "Analysis".
Figure 1: Setting the input and output data type.
To make our Attack Tolerance algorithm more flexible,  we would like to allow our users to choose how many of the highest  degree nodes they wish to remove. On the Algorithm Parameters page,  click *"Add..."*. Set Unique ID to "numNodesToDelete",  Name to "Number of Nodes to Delete", Description to "The number of  highest degree nodes to delete from the input graph", Default Value to  "1", and Input Type to "Integer". Click *OK* to finish  adding this parameter. This will create a field in the user-input  parameters GUI which will appear whenever a user runs our Attack  Tolerance algorithm. Later we'll show you how to access these values  from the AttackToleranceAlgorithm class.
Figure 2: Setting the algorithm parameters to allow user interaction.
Now we have finished creating the supporting files for our plugin, and are ready to begin writing code.

h3. The Algorithm class

Your AttackToleranceAlgorithm file should initially look like this:package org.my.attacktolerance;

import java.util.Dictionary;

import org.cishell.framework.CIShellContext;
import org.cishell.framework.algorithm.Algorithm;
import org.cishell.framework.algorithm.AlgorithmExecutionException;
import org.cishell.framework.data.Data;

public class AttackToleranceAlgorithm implements Algorithm {
private Data\[\] data;
private Dictionary parameters;
private CIShellContext context;

public AttackToleranceAlgorithm(Data\[\] data, Dictionary parameters, CIShellContext context) {
        this.data = data;
        this.parameters = parameters;
        this.context = context;

public Data\[\] execute() throws AlgorithmExecutionException {
    	return null;

There are a few noteworthy things going on here. You will notice that the AttackToleranceAlgorithm class has a constructor, which accepts all the objects it needs to  perform its task. The Data\[\] object contains an array of input data from  the CIShell Data Manager, which the user  has chosen to perform this algorithm on. In the case of our algorithm,  the data array will contain zero element: a Jung Graph, because this is  what we specified in our in_data property. The parameters Dictionary  contains input values from the user-input parameters GUI, which is  always shown to users before an algorithm is run. The CIShellContext allows the algorithm to access various services from the CIShell environment. See the [CIShell Specification|http://cishell.org/dev/docs/spec/cishell-spec-1.0.pdf] for information on the various services that are accessible through the CIShellContext.

h3. Importing packages for Java CIShell algorithms

Because we specified the Jung graph as the in_data type, CIShell will arrange for us to be given a Jung graph object when this algorithm  is run (if a network in the Data Manager is of some other type, CIShell's  conversion service will convert that network to a Jung graph). The  input objects are held in the data array that is passed as a constructor  to the algorithm. We use the following code to access the Jung graph in  this array.public Data\[\] execute() throws AlgorithmExecutionException {
        Graph graph = (Graph)(data[0].getData());
    	return null;

OSGi/CIShell does not handle imports like normal Java programs do. In OSGi, each plugin has a separate class loader, and must explicitly declare which packages it wants to use.

To make the JUNG packages available to our plugin,  double-click on META-INF/MANIFEST.MF in your attacktolerance plugin, and  click the "Dependencies" tab at the bottom of the Manifest's window.  You should see something like this:
Figure 3: Manifest dependencies.
Notice that under "Import Packages" several packages are already listed. The CIShell algorithm wizard automatically imports several core CIShell packages.

To import the Jung packages, click "Add...". A dialog box that looks like this should appear:
Figure 4: Importing the Jung packages.
to find all packages with the word "jung" in your  workspace, type "*jung*" in the "Export Packages:" field. All the JUNG  packages exported from the plugin we downloaded earlier should now be  shown. To select all the packages, click the top-most package, then hold  down the Shift key and select the bottom-most package (This should  highlight all of the packages). Click "Ok" to finish our selection.

To see the result of this operation, click the  "MANIFEST.MF" tab at the bottom of the Manifest's window. You should see  something like this:
Figure 5: The MANIFEST.MF file.
The packages we have added now appear as part of the  "Import-Package" attribute. It is possible to edit this file directly,  but it is easier and safer to use the automatic method, as we just did.

Returning to the AttackToleranceAlgorithm,  we should now be able to import the edu.uci.ics.jung.graph.Graph class  with no errors. (Eclipse Tip: Write the Java code which requires some  import, then press Control-Shift-O, and let Eclipse handle the imports  for you. This will only work in OSGi if you have already imported the packages in your manifest.)

h3. Handling input data in CIShell Algorithms

Now that we have the graph object, we can perform any analysis or  operation we like on it. If you intend to modify the object though, it  is important to first make a copy of that object and then modify the  copy. This ensures that users will still be able to operate on the  original input graph as well as the graph which results from running  this algorithm.

To copy the graph object, we use the following code:Graph attackGraph = (Graph) graph.copy();
Before we begin our analysis, there is one last thing  we need to do. We must get the value specified by the user for how many  of the highest degree nodes we should remove. These values are stored in  the "parameters" Dictionary object. The keys in this dictionary are the  "id" values we chose when designing the GUI in the wizard, and the  values of this Dictionary are the values the user supplies when  presented with the GUI we designed. If you don't recall the id or the  type we gave to our parameter, you can look in the /OSGi-INF/metatype/METADATA.XML  file. This file is the result of the parameters step in the wizard.  (For more information about this file, see [OSGi Compendium  'Metatype Service Specification' Section 105|http://www.osgi.org/Release4/Download].

The following line is used to extract the number of nodes we should delete, "numNodesToDelete" from the Dictionary. int numNodesToDelete = ((Integer) parameters.get("numNodesToDelete")).intValue();
Now we have obtain everything we need to do the attack  tolerance analysis. Since the specifics of this algorithm are not  important to learning about CIShell, I have provided the core code in the class below:

AttackTolerance:package org.my.attacktolerance;

import java.util.Iterator;

import edu.uci.ics.jung.algorithms.importance.DegreeDistributionRanker;
import edu.uci.ics.jung.algorithms.importance.NodeRanking;
import edu.uci.ics.jung.graph.Graph;
import edu.uci.ics.jung.graph.Vertex;

public class AttackTolerance {

* Perform an attack tolerance test on the graph.
* @return a Graph with 'numNodesToDelete' of its highest degree nodes deleted.
* Edges associated with deleted nodes will be removed as well.
public static Graph testAttackTolerance(final Graph graph, int numNodesToDelete) {

Graph graphToAttack = (Graph) graph.copy();

DegreeDistributionRanker rankByDegree = new  DegreeDistributionRanker(graphToAttack);

Iterator nodesByDegree = rankByDegree.getRankings().iterator();
for (int numNodesDeleted = 0;
numNodesDeleted < numNodesToDelete && nodesByDegree.hasNext();
numNodesDeleted++) {

			Vertex v = ((NodeRanking) nodesByDegree.next()).vertex;


return graphToAttack;
Here we've created a third class, AttackTolerance, which will be used by AttackToleranceAlgorithm. It is a good practice to separate the CIShell Algorithm code from the domain-specific analysis code for reasons of  modularity. You can have as many additional classes or packages as you  like in a plugin, and can also share classes between plugins by  importing and exporting packages through a plugin's manifest, as we saw  in previous sections with the Jung library.

Now that we've fleshed out the code for our analysis, we must alter our AttackToleranceAlgorithm to use this new class, and we must return the result of our analysis to CIShell in the form of a Data object.

Below is the updated code for AttackToleranceAlgorithm, which now utilizes the AttackTolerance class, and returns the modified graph as Data:package org.my.attacktolerance;

import java.util.Dictionary;

import org.cishell.framework.CIShellContext;
import org.cishell.framework.algorithm.Algorithm;
import org.cishell.framework.data.BasicData;
import org.cishell.framework.data.Data;
import org.cishell.framework.data.DataProperty;

import edu.uci.ics.jung.graph.Graph;

public class AttackToleranceAlgorithm implements Algorithm {

private Data\[\] data;
private int numNodesToDelete;

public AttackToleranceAlgorithm(Data\[\] data, Dictionary parameters, CIShellContext context) {
		this.data = data;
		this.numNodesToDelete = ((Integer) parameters.get("numNodesToDelete")).intValue();

public Data\[\] execute() {
Graph inputGraph = (Graph) (data[0].getData());

Graph outputGraph = AttackTolerance.testAttackTolerance(inputGraph, numNodesToDelete);

Data outputData = prepareOutputData(outputGraph);

return new Data\[\] { outputData };

private Data prepareOutputData(Graph outputGraph) {
		Data outputData = new BasicData(outputGraph, Graph.class.getName());

		Dictionary metadata = outputData.getMetadata();
		metadata.put(DataProperty.PARENT, data[0]);
		metadata.put(DataProperty.TYPE, DataProperty.NETWORK_TYPE);
		metadata.put(DataProperty.LABEL, "High Degree Node Deletion (Attack Tolerance)");

		return outputData;
The important part of this code is the  prepareOutputData() method, specifically the metadata of the Data  object. When returning data to CIShell, we must set certain metadata on the data to tell CIShell various things about the data, such as its type (NETWORK_TYPE, in the  case, which is primarily used by the Data Manager to give the data the  appropriate icon for a network), label, which is used as the name of the  data in the Data Manager, and parent, which is used to specify which  data item this file should be a child of in the data manager. All of the  possible Data properties are documented in the [CIShell Specification|http://cishell.org/dev/docs/spec/cishell-spec-1.0.pdf].

When we construct our outputData object, we provide two arguments to the BasicData constructor: the outputGraph itself, and also the type of the output  graph. This type should match the out_data type of the algorithm (in  this case, our output type was the same as our input type : a JUNG  graph, but it is perfectly acceptable to produce output of a different  type from your input. See Making Converters and Validators).

The algorithm is now complete. Too see the algorithm  in action, export it into the Network Workbench tool. Load a network  file from the /sampledata/ directory, select it in the Data Manager, and  run our algorithm from the Analysis menu. You should be able to  visualize the network both before and after our algorithm using the  GUESS tool in the Network Workbench visualization menu.

Congratulations\! You have now created a real working CIShell algorithm.

h3. Optional: Creating user-input parameters GUIs at runtime

Sometimes it is useful to modify the user-parameters GUI based on the  data it is operating on. For instance, if you wanted to let a user  choose which column of a table to perform some operation on, you would  need to populate a drop-down box with the columns present in that table.

In the case of our attack tolerance algorithm, maybe  we would like to recommend how many highest-degree-nodes should be  removed from the network, based on the total number of nodes.

To do this, we must modify the AttackToleranceAlgorithmFactory. Our AlgorithmFactory must implement the ParameterMutator interface, which includes only a single method:	public ObjectClassDefinition mutateParameters(Data\[\] data,
ObjectClassDefinition parameters)
The Data\[\] array is the data which the algorithm will  be operating on, and the parameters object is an object representation  of the pre-mutated GUI (the one we defined in our wizard, and which is  defined in file form in METADATA.XML). In order to fully understand the  parameters object, you will need to read [OSGi Compendium  'Metatype Service Specification' Section 105|http://www.osgi.org/Release4/Download], and [The CIShell Specification, 'MetaTypeProvider Extensions', Section 2.5.2|http://cishell.org/dev/docs/spec/cishell-spec-1.0.pdf]. For now it should suffice to provide the relevant source code, and briefly describe its operation.

Source code for AttackToleranceAlgorithmFactory as a ParameterMutator:package org.my.attacktolerance;

import java.util.Dictionary;

import org.cishell.framework.CIShellContext;
import org.cishell.framework.algorithm.Algorithm;
import org.cishell.framework.algorithm.AlgorithmFactory;
import org.cishell.framework.algorithm.ParameterMutator;
import org.cishell.framework.data.Data;
import org.cishell.reference.service.metatype.BasicAttributeDefinition;
import org.cishell.reference.service.metatype.BasicObjectClassDefinition;
import org.osgi.service.metatype.AttributeDefinition;
import org.osgi.service.metatype.ObjectClassDefinition;

import edu.uci.ics.jung.graph.Graph;

public class AttackToleranceAlgorithmFactory implements AlgorithmFactory, ParameterMutator {
public Algorithm createAlgorithm(Data\[\] data, Dictionary parameters, CIShellContext context) {
        return new AttackToleranceAlgorithm(data, parameters, context);

public static final int DELETE_ONE_IN_N_NODES_BY_DEFAULT = 10;

* set the default value for 'Number of Highest Degree Nodes to Delete'
* to 1/Nth of the total number of nodes in the graph.
public ObjectClassDefinition mutateParameters(Data\[\] data, ObjectClassDefinition parameters) {

//calculate how many nodes to delete by default

Graph inputGraph = (Graph) data[0].getData();
int defaultNumNodesToDelete = calculateDefaultNumNodesToDelete(inputGraph);

BasicObjectClassDefinition newParameters = new BasicObjectClassDefinition(
parameters.getDescription(), null);

//for each attribute definition in the original attribute parameters
AttributeDefinition\[\] paramAttributes =
for (int ii = 0; ii < paramAttributes.length; ii++) {
AttributeDefinition paramAttribute = paramAttributes[ii];
//if it is the numNodesToDelete attribute...
if (paramAttribute.getID().equals("numNodesToDelete")) {
				 * add that attribute to our new set of attributes,
				 *  but with the new default value we calculated
				AttributeDefinition modifiedAttribute = new BasicAttributeDefinition(
						paramAttribute.getID(), paramAttribute.getName(),
						paramAttribute.getDescription(), paramAttribute.getType(),
						ObjectClassDefinition.REQUIRED, modifiedAttribute);

			} else {
				//add any other attribute to our new set of attributes as-is.
						ObjectClassDefinition.REQUIRED, paramAttributes[ii]);

//return our new attribute parameters
return newParameters;

private int calculateDefaultNumNodesToDelete(Graph graph) {
		int numNodesInGraph = graph.numVertices();
		int recommendedToDelete = Math.max(numNodesInGraph / DELETE_ONE_IN_N_NODES_BY_DEFAULT, 1);
		return recommendedToDelete;
For this code to compile, you will need to import the  package "org.cishell.reference.service.metatype" in the project's  manifest.

The basic pattern is to create a new ObjectClassDefinition (the object that describes the GUI, and is based on the METADATA.XML file) based on the old ObjectClassDefinition,  with some minor modifications. Here, we copy over all the parameters  from the original, except we set the default value of our  "numNodesToDelete" attribute definition to be roughly one-tenth the  number of nodes in the entire graph. (Technically, since we only have  one parameter, we don't need to iterate through the parameters like a  list, but doing it like this will make our mutateParameters method  flexible in case we decide to add more parameters at a later date).